Filter
Top Products
165
Using the Command Line Interface (CLI)
Wireless Interface SSID/VLAN/Profile Parameters
The Wireless Interface SSID table manages the SSID/VLAN pairs, and the Security Profile and RADIUS Profiles
associated to the VLAN
NOTE
The ability to configure up to 16 VLAN/SSID pairs and to configure security and RADIUS profiles per SSID is
available only for 802.11b/g APs and 802.11a Upgrade Kit APs.
802.11b APs do not support multiple VLAN/SSID pairs. APs with the 802.11a card support multiple
VLAN/SSID pairs, but do not support the security profile per SSID capability.
Wireless Distribution System (WDS) Security Table Parameters
The WDS Security Table manages WDS related security objects.
Name Type Values Access CLI Parameter
Wireless Interface SSID
Table
Table N/A R wifssidtbl
Table Index Integer Primary Wireless
Interface = 3
Secondary Wireless
Interface = 4
R index
Table Index Integer 1 - 16 (SSID index) R ssidindex
SSID DisplayString 0 - 32 characters RW ssid
VLAN ID VlanId -1 - 4094 RW vlanid
Table Row Status RowStatus Enable
Disable
RW status
SSID Authorization
Status per VLAN
Integer Enable
Disable
RW ssidauth
RADIUS Accounting
Status per VLAN
Integer Enable
Disable
RW acctstatus
MAC ACL Status per
VLAN
Integer Enable
Disable
RW macaclstatus
Security Profile Integer 1-32 RW secprofile
RADIUS MAC Profile Integer RW radmacprofile
RADIUS EAP Profile Integer RW radeapprofile
RADIUS Accounting
Profile
Integer RW radacctprofile
Deny Non Encrypted
Data
Integer Enable
Disable
R/W denynonencrypted
Name Type Values Access CLI Parameter
WDS Security Table Table N/A R wdssectbl
Table Index Integer Primary Wireless
Interface = 3
Secondary Wireless
Interface = 4
R index
Security Mode Integer none, wep RW secmode
Encryption Key 0 WEPKeyType N/A WO encryptkey0