Filter
Top Products
98
Performing Advanced Configuration
Figure 4-34 SSID/VLAN Edit Entries Screen (VLAN Protocol Enabled)
4. Enter a unique Network Name (SSID), between 1 and 32 characters. This parameter is mandatory.
5. Enter a unique VLAN ID. This parameter is mandatory.
– You must specify a unique VLAN ID for each SSID on the interface. A VLAN ID is a number from -1 to 4094. A
value of -1 means that an entry is “untagged.”
– You can set the VLAN ID to “-1” or “untagged” if you do not want clients that are using a specific SSID to be
members of a VLAN workgroup. Only one “untagged” VLAN ID is allowed per interface.
– The VLAN ID must match an ID used by your network; contact your network administrator if you need
assistance defining the VLAN IDs.
6. If editing an entry, enable or disable the VLAN using the VLAN Status drop-down menu. If adding, this drop-down
menu will not appear.
7. Enable or disable the SSID Authorization status from the drop-down menu.
SSID Authorization is the RADIUS based authorization of the SSID for a particular client. The authorized SSIDs
are sent as the tunnel attributes.
8. Enable or disable RADIUS accounting on the VLAN/SSID under the Accounting Status drop-down menu.
9. Enable or disable RADIUS MAC authentication status on the VLAN/SSID under the RADIUS Authentication
Status drop-down menu.
10. Enable or disable MAC Access Control List status on the VLAN/SSID under the MAC ACL Status drop-down
menu.
11. Enter the Rekeying Interval in seconds. The default interval is 900 seconds.
12. Enter the Security Profile used by the VLAN in the Security Profile field.