Filter
Top Products
Expanding 192
Docking StationDocking Station
Docking StationDocking Station
Docking Station
The docking station allows faster and more convenient
connection of the mains adapter and docking cable.
1. Connect your mains adapter to the socket marked DC at
the rear of the docking station.
2. Plug the mains adapter into your power outlet and switch
on.
3. Connect the small connector of your docking cable to the
socket marked RS232 at the rear of the docking station.
Connect the other end to the COM (RS232) port of your
PC.
RS232
Now, each time you return to your desk, you can place your
netBook onto the docking station to start charging the battery
and connect to your PC. (Start PsiWin as described in the PsiWin
section of this Guide).
To remove the netBook from the docking station, press the eject
pad in the centre to lift it clear of the connector.
For additional information, refer to
\extras\support\netBook\hardware.pdf on the CD.
Connect the RS232Connect the RS232
Connect the RS232Connect the RS232
Connect the RS232
cable and mainscable and mains
cable and mainscable and mains
cable and mains
adapter plugadapter plug
adapter plugadapter plug
adapter plug
Docking connectorDocking connector
Docking connectorDocking connector
Docking connector
PP
PP
P
ush here to disengageush here to disengage
ush here to disengageush here to disengage
ush here to disengage
the netBookthe netBook
the netBookthe netBook
the netBook