Filter
Top Products
1–Getting Started
Setting Security
1-10 ISR645610-00 B
Setting Security
SANsurfer Router Manager security ensures that any router configuration
changes require password authorization. The router management tool prompts
you to enter the password when you do any of the following:
Attempt to save modified router information
Update the firmware on a selected router
Modify information for Fibre Channel or iSCSI ports
Modify LUN mapping or masking parameters
Rename, enable, or disable any virtual port group
Run any of the wizards
Save the router’s configuration and persistent data as a field replaceable
unit (FRU) to a TGZ file
Restore the router’s configuration and persistent data from an existing file
To set the access password:
1. In the router tree, select the router for which you want to set the access
password.
2. Click the Information tab.
3. On the Information page’s vertical tabs on the left, click the lock tab .
The Security page opens, and shows the host name at the top, as shown in
Figure 1-4.
NOTE:
The default SANsurfer Router Manager access password is config. To
ensure router security, change this password after installation.