Filter
Top Products
3–Viewing Router Information
FC Ports
ISR645610-00 B 3-13
Information
The Information page provides basic information for the selected Fibre Channel
port and allows you to enable and disable the port, as shown in Figure 3-7.
Figure 3-7. FC Port: Information Page
The Information page contains the following port information:
Node Name shows the world wide node name (WWNN) assigned to the
Fibre Channel port.
Port Name shows the world wide port name (WWPN) assigned to the Fibre
Channel port.
Port Status lets you change the port status: Enabled (online) or Disabled
(offline). After changing the status, click Save. If you choose to disable the
port, a warning message appears, letting you know it will disconnect one or
more ports. Click Yes to disconnect the port, or No to cancel the changes.
Link Status shows the link status, either Link Up or Link Down.
Port ID shows the ID assigned by the Fibre Channel fabric or AL_PA if the
Fibre Channel port is connected to a private loop.
Actual Connection Mode shows the port’s connection mode, either
Point-to-Point or Loop.
Actual Data Rate shows the port’s operating data rate when online, either
one gigabit per second (1 Gbps) or two gigabits per second (2 Gbps).