Filter
Top Products
3–Viewing Router Information
iSCSI Presented Targets
ISR645610-00 B 3-35
Target Type for the array can be specified as either Source, Destination,
Src+Dest (both source and destination type), or None.
Array Bandwidth can be specified as one of the following: Slow
(50BMB/s), Medium (200BMB/s), Fast (1600MB/s), User Defined, or Max
Available.
User-defined Bandwidth (MB/s) becomes available if the selected Array
Bandwidth setting is User Defined. Type an integer in the box.
Load Balancing is either Enabled or Disabled for this array.
LUN Info Display determines whether the array’s LUNs are identified by
LUN ID, WWULN, or Serial Number.
Array License shows whether a data migration array license has been
applied to the array.
Physical Target Ports information includes:
Port specifies the target port number.
WWPN specifies the target port WWPN.
Port ID indicates the ID assigned by the Fibre Channel fabric or
AL_PA when connected on a private loop.
iSCSI Presented Targets
Selecting the iSCSI Presented Targets branch on the router tree does not provide
any information in the right pane. Expand the iSCSI Presented Targets branch,
and then select a specific presented target to view the Information page for that
target in the right pane.
Information
The Information page for an iSCSI presented target contains the information and
options shown in Figure 3-26.
NOTE:
To apply changes made to this page, click Save.