Filter
Top Products
3–Viewing Router Information
Discovered FC Initiators
3-24 ISR645610-00 B
The VP Group Information section includes the following details:
Index is the VPG index within the router.
VP Group Name identifies the name of the selected VP Group. (To change
the name, enable the VP Group, type a new name, and then click Save.
Refresh the page to see the new name. For details, see “Renaming a Virtual
Port Group” in the help system.)
Status lets you set the VPG status: Enabled or Disabled. (For details, see
“Enabling or Disabling a Virtual Port Group” in the help system.)
WWPN x specifies the world wide port name for each Fibre Channel port.
Discovered FC Initiators
Selecting the Discovered FC Initiators branch on the router tree does not provide
any information in the right pane. Select a specific discovered Fibre Channel
initiator node in the router tree to view the following pages in the right pane:
“Information” on page 3-24
“LUN List” on page 3-25
Information
The Information page for a discovered Fibre Channel initiator contains the
information shown in Figure 3-15.
Figure 3-15. Discovered FC Initiators: Information Page
The Information page contains the following elements:
Node Name identifies the initiator’s WWNN.
Port Name identifies the initiator’s WWPN.
Port ID identifies the Fibre Channel switch-assigned port identifier.