Filter
Top Products
3–Viewing Router Information
FC Ports
3-14 ISR645610-00 B
Advanced Configuration
The Advanced Configuration page provides additional configuration options for
the selected Fibre Channel port, as shown in Figure 3-8.
Figure 3-8. FC Port: Advanced Configuration Page
The Advanced Configuration page contains the following options:
Connection Options lists the available connection types: Loop Only, Point
to Point Only, and Loop Preferred, Otherwise Point to Point. When a
Fibre Channel port is not part of an FCIP route, it only operates in Fibre
Channel loop mode.
Data Rate lists the data rate options: Auto, 2 Gbps, 4 Gbps, or 8 Gbps. The
default is Auto.
Frame Size lists the frame size options: 512, 1048, or 2048 bytes. The
default is 2048.
Execution Throttle lists values of 16, 32, 64, 128, or 256. The default is 64.
If you make any changes on this page, click Save to preserve those
changes.
Statistics
The Statistics page for the selected Fibre Channel port contains a table of
parameters and their values, as shown in Figure 3-10.