Filter
Top Products
Manual for PlatiniX 2 series
Hard Disk LED Connector (HD_LED)
The connector connects to the case’s IDE indicator LED indicating the activity status of IDE
hard disk. The connector has an orientation. If one way doesn’t work, try the other way.
Reset Switch (RESET)
The connector connects to the case’s reset switch. Press the switch once, the system
resets.
Speaker Connector (SPEAKER)
The connector can be connected to the speaker on the case.
Power LED Connector (PWR_LED)
When the system is in power up status, the LED is on. When the system is in suspend
status, the LED is blink. When the system is in suspend to RAM, the LED is off. When the
system is in soft-off status, the LED is off. The connector has an orientation.
GREEN LED Connector (GREEN_LED)
When the system is in power up, ACPI suspend or soft-off status, the LED is off. When the
system is in suspend to RAM status, the LED is on.
ACPI LED Connector (ACPI_LED)
The ACPI LED is a dual-color light with three pins. Pin1and Pin2 drive different color lights. If
Pin1 drives the orange light , then, Pin2 drives the green light, the following status will come
out. When the system is in power up status, the LED is green on. When the system is in
suspend status, the LED is green blink. When the system is in Suspend to RAM status, the
LED is orange on. When the system is in soft-off status, the LED is off.
Hardware Green Connector (SLEEP SW)
Push once the switch connected to this header, the system enters suspend mode.
Key Lock Connector (KEYLK)
The connector can be connected to the keyboard lock switch on the case for locking the
keyboard.
Chapter 2
SPEAKER
RESET GREEN_LED
KEYLK
PWR_LED
ACPI_LED
HD_LED
SPEAKER
RESET
GREEN_LED
KEYLK
ACPI_LED
SLEEP
SW
PWR_LED
HDD LED(+)
HDD LED(-)
ORANGE(-)
GREEN(-)
LED+
POWER
GND
EMPTY
EMPTY
SLEEP
GND
LED+
LED-
LED- KEYLOCK
GND
LED-
LED-
LED+
EMPTY
GND
RESET
SPKDATA
NC
GND
VCC
POWER
SW
POWER
SW
SLEEP
SW