Manual for PlatiniX 2 series
Introduction
Onboard LAN (available on PlatiniX 2-L/-AL, PlatiniX 2I-L/-AL)
#"10/100 Mbit/sec Ethernet support
#"10/100M LAN interface built-in on board
4 USB
#"USB 1.1 compliant
#"Supports wake-up from S1 (power on suspend), S3 (STR) (depend on device)
Onboard I/O
#" Winbond W83627 HF-AW I/O chip
#"One floppy port supporting up to two 3.5
″
or 5.25
″
floppy drives with 360K/720K/1.2M/
1.44M/2.88M format
#" Two high speed 16550 compatible UART (COM1/COM2/COM3/COM4 selective) with 16
byte send/receive FIFO
#" One parallel port supports SPP/EPP/ECP mode
#"Infrared interface
#" All I/O ports can be enabled/disabled in the BIOS setup
Onboard Audio(available on PlatiniX 2-A/-AL, PlatiniX 2I-A/-AL)
#" AC’97 2.1 Specification Compliant
#"16bit stereo codec
#"Multiple stereo input mixer
#"Mono and stereo volume control
#"Provides onboard Line-in Jack, Microphone-in Jack, Speaker-out Jack with onboard
amplifier and MIDI/Joystick Connector
#"Upgradable to 6 channels audio with CNR card
AGP Interface
#"AGP 1.5V Connector supports AGP 2.0 including AGP 4x data transfers
Advanced features
#" PCI 2.2 Specification Compliant
#"Provides Trend ChipAwayVirus On Guard
#"Supports Windows 98/2000/ME soft-off
#" Supports Wake-on-LAN and Wake-on-Modem
#"Supports Keyboard Password Power-on function
#" Supports system monitoring(monitors CPU and system temperatures, system
voltages, fan speed)
#" Providing QDI innovations: StepEasy(optional), SpeedEasy, RecoveryEasy,
BIOS-ProtectEasy, LogoEasy, ManageEasy, BootEasy