Filter
Top Products
Manual for PlatiniX 2 series
PNP/PCI Configurations Setup
Figure-7 PNP/PCI Configurations Setup Menu
The following indicates the options for each item and describes their meaning.
Item Option Description
#"PNP OS Installed
Yes
Device resources assigned by PnP OS.
No
Device resources assigned by BIOS.
This item is valid for the PlatiniX 2I/-A/-L/-AL.
# Reset Configuration
Enabled
The system BIOS will reset configuration data
Data once then automatically set this item as disabled.
Disabled
Disable this function.
#"Resources
Manual
Assign the system resources manually.
Controlled By
Auto(ESCD)
Assign system resources automatically by BIOS.
#"IRQ-3~IRQ-15
PCI Device
The specified IRQ-x will be assigned to PCI only.
assigned to
Reserved
The specified IRQ-x reserved.
This item is valid for the PlatiniX 2/-A/-L/-AL.
#"IRQ-3~IRQ-15
Legacy ISA
The specified IRQ-x will be assigned to ISA only.
assigned to
PCI/ISA PnP
The specified IRQ-x will be assigned to ISA or PCI.
This item is valid for the PlatiniX 2I/-A/-L/-AL.
# DMA-0~DMA-7
Legacy ISA
The specified DMA-x will be assigned to ISA only.
assigned to
PCI/ISA PnP
The specified DMA-x will be assigned to ISA or
PCI.This item is valid for the PlatiniX 2I/-A/-L/-AL.
#"Reserved Memory
N/A
This function is not applied.
Base
C800~DC00
Set the reserved memory base.
This item is valid for the PlatiniX 2I/-A/-L/-AL.
#"Reserved Memory
8~64K
Set the reserved memory length.
Length This item is valid for the PlatiniX 2I/-A/-L/-AL.
#"PCI/VGA Palette
Enabled
Enable PCI/VGA Palette Snoop.
Snoop
Disabled
Disable PCI/VGA Palette Snoop.
BIOS Description