Filter
Top Products
Manual for PlatiniX 2 series
Enable/Disable onboard audio (JSD)
(available on PlatiniX 2-A/-AL, PlatiniX 2I-A/-AL)
If you want to use the on-board audio, set JSD with pin2 & pin3 closed. Otherwise, set
JSD with pin1 & pin2 closed for disabling this function.
Enable
onboard audio
(default)
Disable
onboard audio
JSD
1
2
3
JSD
1
2
3
Enable Front/Back Panel USB Device Wake-up Function (JFUSB/JUSB)
The mainboard provides the advanced USB device wake-up function. The system can be
waked up from its power saving including ACPI S3 by activating USB device. Before using
this function, set JFUSB/JUSB with pin1 & pin2 closed. Otherwise, set JFUSB/JUSB with
pin2 & pin3 closed for disabling. Furthermore, the item “Wake-Up From S3 by USB”in
CMOS Setup should also be set correspondingly to enable or disable this function.
JFUSB JUSB
1
2
3JUSB
Enable
(default)
Disable
JFUSB
1
2
3
JFUSB JUSB
1
2
3
1
2
3
Installation Instructions