Filter
Top Products
Manual for PlatiniX 2 series
#"Suspend Type
Stop Grant
Select the Suspend type.
PwrOn Suspend
#"MODEM Use
3,4,5,7,9,
Special Wake-up event for Modem.
IRQ
10,11
NA
This function is not applied.
#"Suspend Mode
Disabled
The system never enter Suspend mode by timer.
1Min ~ 1Hour
Define the continuous idle time before the system
enters Suspend mode. If any items defined in
“PM Events” are on and activated, the system will
be woken up.
#"HDD Power
Disabled
HDD’s motor will not be off by timer.
Down
1 - 15 Min
Define the continuous HDD idle time before the
HDD enters power saving mode (motor off).
#"Soft-Off by
Instant-Off
The system will immediately power off once the
PWR-BTTN power button is pressed.
Delay 4 sec
The system will power off when power button is
pressed for 4 seconds.
#"Wake-Up by PCI
Enabled
Allow the system to be waked up by PCI card.
card
Disabled
Do not allow the system to be powered on by
PCI card.
#"Wake-Up by
Enabled
Allow the system to be powered on when a
Ring/LAN Ring indicator signal comes up to UART1 or
UART2 from external modem (to LAN Wake-up
Header from LAN adapter or to modem Ring on
Header from internal modem card).
Disabled
Do not allow Ring/LAN wake up.
#"Wake-Up From
Enabled
The system could be waken up by USB devices
S3 by USB from the Suspend to RAM status.
Disabled
The system cannot be waken up by USB devices
from the Suspend To RAM status.
#"CPU THRM-
12.5%, 25%,
Select the duty cycle of the STPCLK# signal,
Throttling
50%, 37.5%,
slowing down the CPU speed when the system
62.5%, 75%,
enters green mode.
87.5%
#"Resume
Enabled
RTC alarm can be used to generate a wake-up
by Alarm event to power up the system.
Disabled
RTC has no alarm function.
BIOS Description