Filter
Top Products
Manual for PlatiniX 2 series
#"Onboard/CNR LAN
Auto
If a CNR Interface is enabled, the onboard LAN
""Selection will be automatically disabled. Otherwise, the
onboard LAN is enabled.
Onboard
The onboard LAN is enabled.
Ext.CNR
CNR Interface is enabled.
# IDE HDD Block
Enabled
Allow IDE HDD to read/write several sectors
Mode once.
Disabled
IDE HDD only reads/writes a sector once.
# KBC input clock
6/8 MHz
Set the PS/2 Keyboard input clock as 6/8/12
12/16 MHz
/16MHz.
# Power On
Button only
Power on by power button.
Function
Password
Power on with keyboard password
.
# KB Power ON
Enter
Enter keyboard password.
Password
# Onboard FDC
Enabled
Onboard floppy disk controller is enabled.
Controller
Disabled
Onboard floppy disk controller is disabled.
# Onboard
3F8/IRQ4
Define the onboard serial port address and
Serial Port 1/2
2F8/IRQ3
required interrupt number.
3E8/IRQ4
2E8/IRQ3
Auto
Onboard serial port address and IRQ are
automatically assigned.
Disabled
Onboard serial port is disabled.
# UART Mode Select
Normal, IrDA
Set UART mode.
ASKIR
# RxD, TxD Active
Hi, Lo/Lo, Hi
Default is recommended.
Lo, Lo/ Hi, Hi
# IR Transmission
Enabled
Enable IR Transmission delay function.
Delay
Disabled
Disable IR Transmission delay function.
# UR2 Duplex Mode
Half
Default is recommended.
Full
# Use IR Pins
IR-Rx2Tx2
Default is recommended.
RxD2, TxD2
BIOS Description