Quatech HD500 Server User Manual


 
Quatech, Inc. AirborneDirect™ User Manual
84 2/21/2011 100-8510-110
Step
Description
Feature Link
Select Network Settings
The wireless interface and security must be
configured before configuring the network
settings.
A page showing the range of network
options and fields, for both the WLAN and
Ethernet interfaces, is displayed.
Select Ethernet Static IP Address
Enter a valid IP address. This address will be
the first IP address leased. If more than one
is leased they will increment from this
address.
The subnet of the address must be different
than the WLAN interface subnet.
The address must be in the format:
XXX.XXX.XXX.XXX
This is also the default address all incoming
traffic on the WLAN interface is routed to.
Select Ethernet Subnet Mask
Enter the subnet mask for the private
network.
The mask must be in the format:
XXX.XXX.XXX.XXX
Select Ethernet Gateway IP Address
Enter a valid Gateway IP address. This is the
Static IP address of the Ethernet interface on
the private network. This must be in the
same subnet as the Ethernet Static IP
Address.
The address must be in the format:
XXX.XXX.XXX.XXX
Press Commit [Button]
Saves changes to the device.
Optional
Press Reload [Button]
Reloads the Network Settings page. Select
this is you have further configuration options
to change.
Optional
Press Restart [Button]
Restarts the device. After the device as
rebooted it will attempt to authenticate to
the configured network. As long as the
network is in range the wireless interface will
connect.
The Ethernet interface will have leased IP
addresses to the Ethernet clients and the
Ethernet interface would have taken the
Ethernet Gateway IP Address. Access to
the public network from the private network
is now possible.
Unless your public network is using the default 192.168.2.XX subnet you should
not change the Ethernet parameters.
Table 46 - Ethernet Adapter interface Configuration - Static IP
Step
Description
Navigation Bar
Select Configuration
You will see a group of fields under the
banner of WLAN Parameters.