Filter
Top Products
36
Operation
• If bank 9 in the channel storage banks does not
contain any empty channels,
Bank
9
full.
appears on the display’s lower line.
Storing a Frequency While Searching for a
Specified Channel
1. When the scanner stops on the frequency, press
FUNC
then
TUNE
.
2. Press
MANUAL
. Select the specified channel using
a number key, then press
MANUAL
again.
3. Press
PGM
.
4. Press
FUNC
then
TUNE
to store the frequency.
5. If desired, press
SEARCH
to resume searching.
Changing a Search Range with a
Preprogrammed Range
You can replace the search range with one of the pre-
programmed ranges.
1. Press
FUNC
then
SEARCH
to enter search program
mode.
PSR
and the search bank number of the cur-
rent range appear at the display’s upper left corner.
2. Press or to select the search bank you want to
replace.
3. Press
FUNC
then
5
.
?SR
and the search bank num-
ber appear at the display’s upper left corner.
20-522b.fm Page 36 Thursday, September 7, 2000 9:41 AM