Filter
Top Products
57
Trunking Operation
1. Press
PGM
.
2. Press
TRUNK
to enter a talk group ID memory
mode.
3. Select a talk group ID bank using
FUNC
, or .
4. Press
FUNC
then
3
.
Confirm
list
clear
?1=YES
Press
other
key
for
NO.
appears.
5. Press
1
to clear the all talk group IDs within a bank.
Please
Wait
then
List
Cleared
appears.
Note:
To cancel the deletion, press any key except
1
.
The scanner returns to the talk group ID memory mode.
OPEN AND CLOSED MODES
When set to the open mode, the scanner only uses the
ID list to look up ID text tags and stops on any ID code.
When set to the closed mode, the scanner stops only on
signals that have an ID code which is found in the ID list
for the bank.
Note:
When you select a channel manually, any trans-
mission opens squelch, regardless of the current mode.
The open or closed mode is set in each channel storage
bank.
+
or
–
appears under the channel storage bank’s
number while scanning. Or, the status display shows the
OPEN/CLOSED mode at the top line while the scanner
is in manual mode or receiving a signal during scanning.
Closed Mode
20-522b.fm Page 57 Thursday, September 7, 2000 9:41 AM