54
CHANGING THE FREQUENCY STEP
The scanner searches at a preset frequency step for
each frequency range. Press
STEP
to change the step in-
crement when moving between frequencies of a search
band or follow these steps to change steps in a specific
bank.
1. Press
SEARCH
.
2. Select a bank.
3. Press
FUNC
then
STEP
.
**PAUSED**
displays on
Line 3.
4. Press
STEP
continuously until you reach the desired
step.
5. Press
FUNC
then
STEP
to return to scanning.
These are the changeable frequency steps your scanner
uses for each frequency range.
USING THE ATTENUATOR
To reduce interference or noise caused by strong signals,
you can reduce the scanner’s sensitivity to these signals.
Press
ATT
until
A
appears on the display to reduce the
scanner’s sensitivity on the current channel.
Range (MHz) Search Step (kHz)
29.000-54.000 5, 10, 15, 20, 25, 30, 50, 100
108.000-136.9875 12.5, 25, 50, 100
137.000-174.000 5, 10, 15, 20, 25, 30, 50, 100
380.000-512.000 12.5, 25, 50, 100
806.000-823.9875 12.5, 25, 50, 100
849.000-868.9875 12.5, 25, 50, 100
894.000-960.000 12.5, 25, 50, 100
20-522.fm Page 54 Friday, September 17, 1999 12:46 PM
