Filter
Top Products
39
3.7.4
Programming multiple files to the User Boot Area
1.
Add all the required target files to the project by selecting [Project->Add Files...] or pressing the INS
key. Note that multiple files can be added at once from the ‘Add File(s)’ dialog.
2.
Click the right mouse button on each file displayed in the workspace window which is destined for the
User Boot Area, and select ‘User Boot Area File’ to mark it as being for the User Boot Area.
3.
Build the device image for the User Boot Area (create a file which is the result of merging all of the
included target files) by selecting the menu item: [Project->Rebuild Image]
4.
Click the right mouse button on the Device Image file (<ProjectName>.ddi) displayed in the workspace
window, and select ‘Download Image’ (or select the menu item
[Project->Download Image] )
5.
Programming is complete when ‘Image successfully written to device’ is displayed in the output
window.
3.7.5 Programming some files to the User Area and other files to the User Boot Area
1.
Add all the required target files to the project by selecting [Project->Add Files...] or pressing the INS
key. Note that multiple files can be added at once from the ‘Add File(s)’ dialog.
2.
Click the right mouse button on each file displayed in the workspace window which is destined for the
User Boot Area, and select ‘User Boot Area File’ to mark it as being for the User Boot Area.
3.
Build the device image for the User Boot Area (create a file which is the result of merging all of the
included target files) by selecting the menu item: [Project->Rebuild Image]
4.
Select the menu item [Project->Download Image] )
5.
Programming is complete when ‘Image successfully written to device’ is displayed in the output
window for both the User Area and the User Boot Area