Filter
Top Products
( 3 / 84 )
Preface
The M3062NT3-RPD-E is an emulation pod for the M16C/62 Group M16C/62N and M16C/30
Group M16C/30L of 16-bit MCUs. It is used with a PC4701 emulator.
This user's manual mainly describes specifications of the M3062NT3-RPD-E emulation pod and how
to setup it. For details on the following products, which are used with M3062NT3-RPD-E, refer to
each product's user's manual.
• Emulator: PC4701 User's Manual
• Emulator debugger: M3T-PD30 User's Manual
All the components of this product are shown in "2.1 Package Components" (page 22) of this user's
manual. If there is any question or doubt about this product, contact your local distributor.
To use the product properly
Precautions for Safety
• In both this user's manual and on the product itself, several icons are used to insure
proper handling of this product and also to prevent injuries to you or other persons,
or damage to your properties.
• The icons' graphic images and meanings are given in "Chapter 1. Precautions for
Safety". Be sure to read this chapter before using the product.
When using outside Japan
• When using in Europe, the United States, or Canada, be sure to use both the emulator
and the emulation pod which meet local standards. EMI standards are not met when
the M3062NT3-RPD-E is used with the PC4700H emulator.