Filter
Top Products
( 39 / 84 )
3.7 Connecting the PC4701
To connect the emulation pod to the PC4701, use the FLX120-RPD 120-pin flexible cable included
with this product package. Connect the PC4701 side connector of FLX120-RPD to the cable
connector of the PC4701, then secure with screws the FLX120-RPD.
(1) Connecting the Cable to the PC4701
Figure 3.10 shows how to connect the PC4701 and FLX120-RPD
Figure 3.10 Connecting the cable to the PC4701
CAUTION
Notes on Connecting the Cable:
•Always shut OFF power before connecting the cable. Otherwise, the internal circuits
may be damaged.
• To connect the FLX120-RPD, be sure to hold the both sides of the PC4701 side
connector horizontally with the "UPSIDE" facing up.
IMPORTANT
Note on Securing the Screws:
• After connecting the cable to the emulator main unit PC4701, be sure to secure the
screws mounted in both sides of the connector.
Emulator main unit
PC4701 side connector of FLX120-RPD
"UPSIDE" should face up.
Secure this screw.
Secure this screw.