Filter
Top Products
( 40 / 84 )
(2) Connecting the Cable to the Emulation Pod
Figure 3.11 shows how to connect the FLX120-RPD and the emulation pod.
Figure 3.11 Connecting the cable to the emulation pod
CAUTION
When Connecting the Cable:
•Always shut OFF power before connecting the cable. Otherwise, the internal circuits
may be damaged.
Emulation pod
FLX120-RPD (Secure with the screws)
IMPORTANT
Note on Securing the Screws:
• After connecting the emulation pod and the FLX120-RPD, be sure to secure the
screws mounted in both sides of the connector cover.