Filter
Top Products
If Your Machine Does Not Operate as You Want
255
5
If Connect Copy Is Cleared
Machine Status Problem/Cause Action
Exited Connect Copy. The master unit main power
switch has been turned off or
the operation switch has been
pressed.
Connect Copy is cancelled
and the display returns to
copy standby mode. On the
master unit, either turn on the
main power switch or press
the operation switch, then
press the [
Connect
] key and
start your copy job again.
Either the sub-unit main pow-
er switch has been turned off
or the operation switch has
been pressed.
A message requesting you to
check the sub-unit is dis-
played on the master unit.
Press the [
Cancel
] key and
clear connect-copying. Either
turn on the main power
switch on the sub-unit or
press the operation switch
and then press the [
Connect
]
key.
The Weekly Timer function
has automatically turned the
master unit off.
Press the master unit opera-
tion switch then press the
[
Connect
] key and copy.
Reference
See “Weekly Timer” in the
System Settings manual.
An error message indicating a
breakdown is shown on the
master unit display.
L
LL
L indicator is lit. Copying is not possible. Fol-
low the instructions displayed
in the error message.