Filter
Top Products
Copying
38
2
C
Make sure
[
Size Magnificatn
]
is high-
lighted.
D Enter the length of the original
using the number keys, and then
press [#].
Note
❒ You can enter sizes within the
following ranges:
E Enter the length of the copy using
the number keys, and then press
[#].
Note
❒
To change the length after press-
ing
[#], select [Original] or [Copy],
and then enter the length.
F Press [OK] twice.
G Place original, and then press the
{Start} key.
Directional Magnification (%)
Copies can be reduced or enlarged at
different reproduction ratios, hori-
zontally and vertically.
a: Horizontal ratio
b: Vertical ratio
Note
❒ You can also select a preset ratio
close to the ratio using [Reduce] or
[Enlarge], and then adjust it further,
using [n] or [o].
A Press [Reduce/Enlarge].
B Press [Specifd. Ratio].
C Press [Direct. Mag.%].
To enter the ratio using the
number keys
A Press [Horizontal].
B
Enter the ratio using the number
keys, and then press [#].
C Press [Vertical].
D
Enter the ratio using the number
keys, and then press [#].
E Press [OK].
To specify a ratio using [n] and
[o]
A Press [With no].
B Press [Horizontal].
C Adjust the ratio using [n] or
[o].
Note
❒ Pressing [n] or [o] changes
the ratio in increments of 1%.
Pressing and holding down
[n] or [o ] changes it in in-
crements of 10%.
Metric
version
1–999 mm
(increments of 1 mm)
Inch
version
0.1"–99.9"
(increments of 0.1")
CP2P01EE
RuC4_AE_Copy-F_FM_forPaper.book Page 38 Thursday, April 14, 2005 1:21 PM