Filter
Top Products
Copying
42
2
Changing the number of sets
You can change the number of copy
sets during copying.
Note
❒ This function can only be used
when the Sort function is turned
on.
A While "Copying" is displayed,
press the {Clear/Stop} key.
B
Press [Change Quantity].
C Enter the number of copy sets us-
ing the number keys, and then
press the {#} key.
Note
❒ The number of sets you can en-
ter differs depending on when
the {Clear/Stop} key is pressed.
D Press [Continue].
Copying starts again.
Stack
Copies can be assembled with each
page shifted.
❖ Shift Stack
This function groups together cop-
ies of each page in a multi-page
original. Every other page stack is
shifted for ease of separation. If the
shift sort tray is installed, this func-
tion is done by sliding from side to
side.
A Press [Stack].
B Enter the number of copies using
the number keys.
C Place originals, and then press the
{Start} key.
Note
❒ When placing originals on the
exposure glass, start with the
first page to be copied. When
placing originals in the ADF, set
the first page on top.
❒ When placing originals on the
exposure glass or in the ADF us-
ing the Batch function, press the
{#} key after all the originals
have been scanned.
3
3
3
RuC4_AE_Copy-F_FM_forPaper.book Page 42 Thursday, April 14, 2005 1:21 PM