Filter
Top Products
Memory Transmission
17
2
B Place the original in the ADF, or
on the exposure glass.
Note
You can send the first few pages
from the exposure glass then
the remaining pages from the
ADF. After you remove the last
page from the exposure glass,
you have 60 seconds to insert
the remaining pages in the ADF.
Note that you cannot place orig-
inals on the exposure glass after
you start using the ADF.
Reference
p.13 “Placing Originals”
C Make the settings you require.
Reference
p.25 “Scan Settings”
p.26 “Original Type”
p.27 “Image Density (Con-
trast)”
D Specify a destination.
Note
If you make a mistake, press the
{Clear/Stop} key, and then enter
the correct number.
Reference
p.29 “Entering a Fax Number”
p.31 “Entering an E-mail Ad-
dress”
p.31 “Using the Destination
List”
p.23 “Chain Dial”, Facsimile Ref-
erence <Advanced Features>
p.24 “Redial”, Facsimile Refer-
ence <Advanced Features>
E When sending the same original
to several destinations (broad-
casting), press [Add Dest] to speci-
fy other destinations.
Note
You do not have to press [Add
Dest] when adding a destination
using a Quick Dial key.
If you do not want to do a
broadcast transmission, pro-
ceed to step
G
.
F Specify a destination.
Note
Press [] to switch the des-
tination between fax number
and e-mail address.
If you want to specify another
destination, repeat steps
E
and
F
.
Entered destinations can be
checked using {U} or {T}.
***
FAX
601
.t
if***
***
FAX
610
.t
if***
***
FAX
611
.t
if***