Filter
Top Products
Faxing
22
2
Reference
p.13 “Placing Originals”.
C Select the scan settings you re-
quire.
Reference
p.25 “Scan Settings”
p.26 “Original Type”
p.27 “Image Density (Con-
trast)”
D Specify a destination.
Note
If you make a mistake, press the
{Clear/Stop} key, and then enter
the correct number.
Reference
p.29 “Specifying a Destination”
p.31 “Using the Destination
List”
p.23 “Chain Dial”, Facsimile Ref-
erence <Advanced Features>
p.24 “Redial”, Facsimile Refer-
ence <Advanced Features>
E Press the {Start} key.
The machine calls the destination.
While it is dialing, the number or
name which is programmed as the
Own Name or Own Fax Number
in the machine of the other party is
shown on the display. When con-
nected, the machine starts scan-
ning the original.
Note
Do not lift the ADF during scan-
ning.
After transmission, the standby
display appears.
***
FAX
615
.t
if***
ABZ
106
S.eps