Filter
Top Products
CHANGING DEFAULT SE7TINGS User Tools
CHANGING DEFAULT SETTINGS
User Tools
This section is for the key operators in charge of this copier.
copier’s default settings using the following user tools.
User Tools Menu
< UserTools>
m
< User Tools>
m
Selectone of the folloiulngitems.
Selectoneof the followingItems.
~ Auto rwet/Auto off
~ ChangefixedR/E
~Select specialtray ~Set standardtraydisplay
~ Set date/tIme
~ Set UserCode(s)
~Weekly Timer ~
~ Check/Resetcopy count @
~ Set operationmodes
a
~Reset data for User Codes @
How To Access The User Tools
10
2.
3.
Press the Clear Modes key.
Press the Clear/Stop key for more
than 3 seconds until the User Tools
Menu appears on the touch panel dis-
play.
Select the menu number you want to
use by touching the touch panel dis-
play.
~
You can change or set the
< User Tools>
m
Selectone of the folIowlng[terns.
~ Check/ResetCODYcount
~ Resetdata forUser Codes
n ResetUserCodes/Counters
Q1
~ SelectARDF/RDHmodes m
:Q
(Ml
This copier has 12 user tools. You can see 5 user tools on the touch panel display
a
+
at the same time. Use these keys to see other
user tools menu.
(~[ U.e to exit from
the usertocd Condition
Imd
Use to return to the user tools menu display.
14