Filter
Top Products
DO’S AND DON’TS
DO’S AND DON’TS
WHEN ADDING TONER
WARNING: Do not incinerate toner or toner containers. Toner dust may ignite
when exposed to open flame.
[ WARNING: Dispose of the used toner cartridge according to your local
Cl When adding toner, follow the instructions on the touch panel display.
IJ Do not turn off the main switch. If you do, your copy settings are cleared.
WHEN REMOVING MISFED PAPER
WARNING: Since some parts of the copier are supplied with high electrical
voltage, touch only the parts specified in the instructions inside the
machine door.
I
WARNING; When removing misfed paper from section “D”, use caution. The
fusina unit mav be verv hot.
I
ClWhen removing misfed paper, follow the instructions on the touch panel display.
IJ Do not turn off the main switch. If you do, your copy settings are cleared.
Cl Do not leave any torn scraps within the machine.
D After removing misfed paper, make sure that all units and levers are returned to their original
positions and that all covers are closed.
O When removing misfed paper from the dual job feeder, open the cover of the feed-in unit.
GENERAL OPERATION
D In the Staple mode, do not use paper that is curled or has low stiffness.
D When ou use the bypass feed tray while placing the original directl on the exposure glass,
K
i
lower t e platen cover, dual job feeder, or recirculating document andler before pressing
the Start key.