Filter
Top Products
User Tools
CHANGING DEFAULT SETTINGS
~[
Change fixed R/E
This copier has 10 fixed ratios (4 enlargements and 6 reductions). You can change these
fixed reproduction ratios to different ratios.
n
7 Set standard tray display
Paper Tray Priority
When Auto Paper Select is canceled, the 1st tray is selected
as a default setting. You can cancel this setting and select
the other tray as a default setting.
~ default: OFF
Auto Paper Select
As a default setting, the Auto Paper Select is selected. You
Priority
can cancel this setting,
Cl default: Yes
Paper Tray Display
in APS mode
In the default setting, the tray display is shown only when the
Auto Paper Select mode is canceled. You can cancel this
setting and have the tray display shown always.
~ default: No
Auto Tray Switching
If you load paper of the same size and in the same direction
in two or more paper trays, the machine automatically shifts
to another tra when the tray in use runs out of paper.
J
Cl default: es
Cl Bypass feed tray, and tra s for cover sheet and slip sheet
{cannot be used for Auto ray Switching.
~ Regarding User Tools No. 8, 9, 10, and 11, see the next page.
[ 12 I Select ARDF/RDH modes
O This user tool can be used only when your machine is equipped with the dual job feeder (system A and B) or
the recirculating document handler (system C).
Original Count Display
In the default settin , you can see the entered cop quantity
?
t
on the upper part o the copy counter and the num er of
copies made on the lower part. You can cancel this setting
and see the number of originals to be fed on the lower part
of the cop counter. On the upper art, you can see the
?
r
number o copies made. To cance the default setting, select
“Yes”.
I ~ default: No
Auto Paper Select
I
In the default setting, the Auto Paper Select is not selected
when you set originals in the dual job feeder or recirculating
document handler. You can cancel this setting.
~ default: No
Thin Paper mode
(for machine with dual job
feeder
only)
(system A or B)
Use when changing the type of originals to be fed. Select
this function when you use thin originals (lighter than 53
g/mz, 14 lb).
Cl default: No
17