Filter
Top Products
FUNCTIONS ON OPERATION SCREENS
Cover/Slip Sheet (Paper Designate)
The Paper Designate function can be used only when your machine is equipped with the dual job feeder
(system A or B), or the recirculating document handler (system C).
Before using this function, please refer to pages 4 and 5 to know which system you have because this
function is different depending on the system you have.
System A and B (with dual job feeder)
After selecting this function, you have to select the Autocount key or the Number keys key
to input the number of originals.
System C (with recirculating document handler)
After selecting this function, the machine starts counting the number of originals automatically.
13When using the Paper Designate function, you should set the tray for slip sheets using the User Tool 2. See
page 15.
D You can also select the bypass feed tray for slip sheets. In this case, make sure to set paper for slip sheets
that are identical in size and direction with the paper to which you are copying, because the machine cannot
detect the length of paper set in the bypass feed tray.
O Two paper trays of identical size and direction are required for this function.
Designated originals will be copied onto slip sheets fed from the tray set by User Tool 2. Up
to 10 originals can be designated.
62