Filter
Top Products
FUNCTIONS ON OPERATION SCREENS
Cover/Slip Sheet (Front Cover)
Cover mode
The Front Cover function can be used only when your machine is equipped with the dual job feeder (sys-
tem A or
B) or the recirculating document handler (system C).
Cl ~5hen using the Front Cover function, you should set the tray for cover sheets using User Tool 2. See page
Cl You can also select the bypass feed tray for cover sheets.
In this case, make sure to set paper for cover
sheets that are identical in size and direction with the paper to which you are copying, because the machine
cannot detect the length of paper set in the bypass feed tray.
D Two paper trays of identical size and direction are required for this function.
The original on the top of the stack will be copied on the front cover sheet. Front cover sheets
will be fed from the tray set by User Tool 2.
,
.(hmq+,[r~ ~.. ~ .. ~.‘ ., ~ ....,
“,
>.
● I
I
A blank front cover sheet is added as the first page of the copy set. Front cover sheets will
be fed from the tray set by User Tool 2.
60