Filter
Top Products
The Fron~Back Covers function can be used only when your machi~e is equipped with the dual job
feeder (system
A or B), or the recirculating document hand/er (system C).
~ When using the Front/Back Covers function, you should set the tray for cover sheets using User Tool 2. See
page 15.
0
You can also select the bypass feed tray for cover sheets. In this case, make sure to set paper for cover
sheets that are identical in size and direction with the paper to which you are copying, because the machine
oannot deteot the length of paper set in the bypass feed tray.
Cl Two paper trays of identical size and direction are required for this function.
The originals on the top and bottom of the stack will be copied on cover sheets. Cover sheets
will be fed from the tray set by User Tool 2.
.
““”;;”~-
Blank front and back covers are added to the copy set. Cover sheets will be fed from the tray
set by User Tool 2.
61