Filter
Top Products
CHANGING DEFAULT SETTINGS
User Tools
User Tools for User Code Mode
If the copier is set to use the User Code function, operators must input their user
codes before the machine can operate. The copier keeps count of the number of
copies made under each user code. To have the machine set to the User Code
mode, please contact your sales or service representative .
User tools 8,9, 10 and 11 are for the User Code mode. When you want to use
these user tools, you should enter the key operator access code first. Please ask
your sales or service representative for the key operator access code when the
machine is set to the User Code mode.
If your machine is set to the User Code mode, to prevent others from making copies
using your user code, while holding down the Clear Modes key, press the Clear/Stop
kev afier coDvina.
~[ Set User Code(s)
Use to re ister your user code (maximum: 6 digits)
Register ~Cl Up to 00 user codes can be registered.
~ Registered user codes will be sorted in numerical order.
Use
to change your present code to a new one.
Change
D The number of copies made under the old code is added
to that made under the new user code.
Delete
Use to delete your user code.
~ The number of copies made under the code is deleted.
c1
g Check/Reset copy count
You can check the number of copies made using each user code. Also, you can clear each
code’s counter.
~[Reset data for User Codes
Use to reset counter data for all user codes.
n
11 Reset User Codes/Counters
Use to reset all user codes and counters,
18