Filter
Top Products
If Your Machine does not Operate as You Want
83
5
❖
❖❖
❖
When one of the following messages is displayed on the guidance display
-
--
-When a service code (E-XX) is displayed in the guidance display
Turn the main switch off and on. If a service code appears again, contact your
service representative.
Note
❒ If a service code appears on the guidance display after you turn the main
switch off and on a few times, do not continue turning it on and off. Leave the
machine off.
❒ E04 might be displayed when you make masters continuously using the orig-
inals that have solid images. In the case, turn off the main switch and wait for
a while.
Guidance Display Meaning
RE-ENTER COPY NUMBER MAXIMUM
IS XXX
The maximum number of prints that can be
entered is specified by the Service Program
mode. Change the number of prints.
RE-ENTER COPY NUMBER MINIMUM
IS XXX
The minimum number of prints that can be en-
tered is specified by the Service Program
mode. Change the number of prints.
SET THE ORIGINALS Make prints after you confirm whether there is
an original.
INPUT YOUR ID CODE User Code mode is set. Before printing, enter
your user code.
NO ADDITIONAL PRINTS ALLOWED Security mode is set. If you make the next mas-
ter, Security mode is canceled.
MASTER MAKING HALTED Master making is halted.
Press the
{
Start
}
key.
SilverV-gb.book Page 83 Monday, May 15, 2000 3:32 PM