Filter
Top Products
User Codes
67
3
E
Specify the Auto Reset time. En-
ter the desired setting with the
number keys and press the {
{{
{q
qq
q}
}}
}
key.
F
Press the {
{{
{
Clear Modes/Energy Sav-
er
}
}}
} key to leave Service Program
mode.
How to Use User Code Mode
A
Input your assigned 3-digit user
code with the number keys, then
press the {
{{
{q
qq
q}
}}
} key.
B
Make your prints.
C
After you have finished, press the
{
{{
{
Clear/Stop
}
}}
} key while holding
down the {
{{
{
Clear Modes/Energy Sav-
er
}
}}
} key.
Note
❒ This prevents others from mak-
ing prints using your user code.
❒ If you do not follow this step,
the machine will not request the
next user for their codes unless
the auto reset time has expired.
TSLS011E
TSLS011E
SilverV-gb.book Page 67 Monday, May 15, 2000 3:32 PM