Filter
Top Products
Memory Mode—Group Printing from Different Originals
31
1
D
With the number keys, enter the
number of prints for the second
original.
E
Press the {
{{
{q
qq
q}
}}
} key.
This stores the number of prints to
be made for the second original in
memory 2.
Note
❒ Repeat steps
D
and
E
for each
original.
❒ The number of prints for up to
20 originals can be stored.
F
Press the {
{{
{q
qq
q}
}}
} key again.
The memory returns to memory 1.
Note
❒ If you store the number of prints
for 20 originals, the memory
number returns to 1. It is not
necessary to press the {q} key.
G
Set the first original face down on
the exposure glass.
Note
❒ Set originals one sheet at a time
in the same order that you
stored them in memory.
H
Press the {
{{
{
Start
}
}}
} key.
I
Check the image position of the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the {
Image
Position
} keys (see ⇒ P.9 “Shift-
ing the Print Image Position For-
ward or Backward”) or the side
tray fine adjusting dial (see ⇒
P.10 “Shifting the Print Image Po-
sition to the Right or Left”).
TSLS011E
TSLS01JE
TSLH010E
TSLS012E
SilverV-gb.book Page 31 Monday, May 15, 2000 3:32 PM