Filter
Top Products
Printing Using the Optional 30 Originals Document Feeder
47
2
C
Press the {
{{
{
Combine
}
}}
} key to select your desired mode.
Reference
For the details of this function, See ⇒ P.33 “Combine—Combining 2 Origi-
nals onto One Print”.
D
Press the {
{{
{
Start
}
}}
} key.
E
Check the image position of the trial or proof print.
Note
❒ If the image position is not correct, adjust it using the {
Image Position
} keys
(see ⇒ P.9 “Shifting the Print Image Position Forward or Backward”) or the
side tray fine adjusting dial (see ⇒ P.10 “Shifting the Print Image Position to
the Right or Left”).
❒ After the first original is on the master, the second original is fed.
❒ If you set only one original, the beeper sounds after the first original is on
the master. Set the second original and the desired image settings. Then,
press the {
Start
} key.
TSLS012E
SilverV-gb.book Page 47 Monday, May 15, 2000 3:32 PM