Filter
Top Products
30
14. Click Print.
Illustrator 8.0
[Windows]
The Kodak Color Management System must be installed to output successfully from Illustrator 8 to Roland
ColorChoice Software.
1. From the Roland ColorChoice Print Monitor click Setup>Setup Properties. Then click the Print tab.
2. Make sure the Perform Color Correction check box has a check in it.
3. Click OK in the Setup Properties dialog.
4. In Illustrator, go to File>Document Setup.
5. Select ‘Use printers default screen.’
6. Select ‘Use Print Setup’.
7. Click the Print Setup button. Print Setup screen appears.
8. Select your printer in the Name field.
9. Click the Properties button.
10. Choose a paper size from the ‘Paper’ field or select a Custom page for a custom page size.
11. If you choose a custom page size, you may enter the custom size by clicking the Custom button and
entering the width and height.
12. If you choose custom page, click OK to Custom Defined Size dialog.
13. Click OK in the Properties dialog.
14. Click OK in the Print Setup dialog.
15. Click OK in the Document Setup dialog.
16. If you want your monitor to soft-proof CMYK output, go to File>Color Settings and check ‘Simulate print
colors on display’.
17. Go to File>Print.
18. If not dimmed, set Output to Composite.
19. Set PostScript to Level 3.
20. Check Force Fonts to Download.
21. Click OK to print.
Illustrator 9.0
[Windows]
The Kodak Color Management System must be installed to output successfully from Illustrator 8 to Roland
ColorChoice Software.
1. From the Roland ColorChoice Print Monitor click Setup>Setup Properties. Then click the Print tab.
2. Make sure the Perform Color Correction check box has a check in it. Also, if you're using the
transparency feature of Illustrator 9.0 or the like (described later in this document), we recommend
setting "Bitmap rendering intent" and "Vector rendering intent" to the same value. Color stitching may
occur if the settings are different. (For more information about color stitching, refer to "The Transparency
Feature of Illustrator 9.0" later in this document.)
3. Click OK in the Setup Properties dialog.
4. In Illustrator, go to File>Document Setup. From the pop-up menu, choose Transparency.
5. The Quality/Speed slider should normally be left at the center position. If there problems such as missing
portions of the artwork, move the slider one tick to the left. (If you are performing printing only, move it all
the way to the left.)