Filter
Top Products
7
Supported Printers
RCC for PC-12 : ColorCAMM PC-12
Windows 98/Windows Me Installation
Important Before you install and set up the RIP program, you must be sure to install the PC-12
ColorCAMM Driver for Windows.
Run Setup for the PC-12 ColorCAMM Driver for Windows.
For the connection between the computer and the machine, choose USB Port Connection.
1. Insert the PC-12 ColorCAMM Driver for Windows Installation CD-ROM into the computer's CD-ROM
drive, then follow the instructions in "Part 2 Installing the Driver" of the PC-12 User's Manual to install
and set up the driver.
2. Insert the Roland ColorChoice Installation CD into your CD-ROM drive.
3. From the CD Setup window, select the language of the installer you would like.
4. Click Next. The Software to Install window displays.
5. Select the product you would like to use from Product drop-down box.
6. Select the language you would like from the Language drop-down box.
7. Click Next. The system displays the Welcome window.
8. Click Next. The select Program Folder displays. The Select Program folder displays.
9. Select the folder you would like Roland ColorChoice to display in.
10. Click Next. The Destination Location window displays.
11. Select the destination by clicking on Browse or except the default location.
12. Click Next.
Note: If you currently have Roland ColorChoice on your system the Clear Preferences window displays.
Click Yes to delete preference settings on your system. Click not to retain your old preference settings.
13. Click OK to restart your computer.
Setting Up the Roland ColorChoice
1. Select a printer model.
2. Click Next.
3.
Specify USBXXX (PC-12) as the port for the output device. (Here, "XXX" is a number such as 001.)
4. Click Finished.
5. Click OK.
Installing AdobePS Driver for Windows 98/Me
1. The Welcome screen displays.
2. Click Next.
3. After reading the License agreement, click ACCEPT to accept. The Printer Connection Type window
displays.
4. Select the Directory Connect.
5. Click Next.
6. The Local Port selection window displays.
7. Select the port type you would like to use. You may choose LPT.