Filter
Top Products
41
QuarkXPress 3.32
[Macintosh]
1. QuarkXPress requires a Printer Description File (PDF) to access specific options of the printer. Install
the file ‘Roland ColorCAMM PDF’ from Setup CD>Quark Files to the ‘Quark XPress:PDF’ folder, before
starting QuarkXPress.
2. From the Roland ColorChoice Print Monitor click Printer>Setup Properties. Then click the Print Tab.
3. Make sure the Perform Color Correction checkbox has a check in it, correct profiles and rendering intent
are set.
4. Click OK to close Setup Properties.
5. Go to Apple menu and select Chooser. Highlight Adobe PS and make sure ColorCAMM PC-12 RIP@...
is selected.
6. Launch QuarkXPress. If you are using the EFIColor XTension, select Edit>Preferences>EfiColor and
uncheck Use EFI Color.
7. Go to File>Page Setup.
8. Choose a standard paper size in the Paper field.
9. Select Custom Page Default from the pop-up menu if a custom page size is required, and enter your
custom page size. Then enter a Custom Page Name and click the Add button.
10. Select Page Attributes from the pop-up menu. Select the defined Custom Page in the ‘Paper’ field.
11. Select QuarkXPress from the pop-up menu. Select Roland ColorCAMM. Do NOT select Roland
ColorCAMM PC-12, or you will not be able to print. Click OK for Adobe PS Page Setting dialog.
12. Go to File>Print. Select your printer in the ‘Printer’ field and select the page you want to print, and the
number of copies.
13. Select Printer Specific Options from pop-up menu. If you want the file to be printed automatically, select
Print in the After Spooling option. If you want to verify the print mode and the profile settings before
printing the file, select Hold. Select Hold in the After Output option, if you want to keep the file in the
Print Monitor after the file is printed.
14. Click Print to start printing.
QuarkXPress 4.04
[Macintosh]
In order to print successfully to QuarkXPress, you will need a special XTension. The name of the XTension is
‘PrintRGB’. This file is available on your Installation CD, in the Quark Files folder. Install the file to the ‘Quark
XPress:XTensions’ folder, before starting QuarkXPress.
1. From the Roland ColorChoice Print Monitor click Setup>Properties. Then click the Print tab.
2. Make sure the Perform Color Correction checkbox has a check in it, and that correct profiles and
rendering intent are set.
3. Click Quit to close the Properties dialog.
4. Go to the Apple menu and select Chooser. Highlight Adobe PS and make sure that ColorCAMM PC-12
RIP@... is selected.
5. Launch QuarkXPress. Select Edit>Preferences>Color Management and uncheck Color Management
Active.
6. Click File>Page Setup.
7. In the Printer Description list, select your Roland printer. Then click the Output tab to display it.
8. Select Composite color from the Print Colors list and Printer from the Halftoning list. Then click the Page
Setup button.
9. Choose a standard paper size in the Paper field.