Filter
Top Products
SETTING UP YOUR PRINTER
2.7
1
Plug the power cord into the power
receptacle on the back of the printer.
2
Plug the other end into a properly
grounded AC outlet.
3
Turn on the power.
Turn on the Printer
To AC outlet
As the printer powers up, all the printer
control panel lights turn on briefly. When
only the Data light remains on, press and
hold the Demo button.
Hold down the button for about 2 seconds
until all lights blink slowly, then release,
the demo page will print.
ML-1210 / ML-1220M / ML-210
Excellent Performance
Saving & Convenience
Compatibility
Laser Beam Printer
The demo page provides a sample of the
print quality and helps you verify the
printer is printing correctly.
Print a Demo Page!
➜