Filter
Top Products
PRINTING TASKS
5.6
Using Toner Save Mode
Toner Save mode allows the printer to use less toner on
each page. Selecting this option will extend the life of your
toner cartridge and reduce your cost per page without a
significant reduction in print quality.
There are two ways to enable the Toner Save mode:
To enable this feature from your printer
Press the Toner Save button on the control panel. The printer
must be in Ready mode (Data light is on).
• If the button backlight is on, toner save mode activates and
the printer uses less toner to print a page.
• If the button backlight is off, toner save mode is disabled
and the printer prints in a normal mode.
Note: To enable or disable the Toner Save mode from the control
panel, the Toner Save Mode option in the printer driver must be
set to Printer Setting. See below.
To enable this feature from the software application
1
To change the print settings from your software application,
access the printer properties. See page 5.1 to access the
printer properties.
2
Click the Graphic tab, and select the Toner Save Mode
option. You have the following options:
• Printer Setting: If you select this option, this feature is
determined by the setting you’ve made on the control
panel of the printer.
• Standard: If you don’t need to save toner to print a
document, select this option.
• Save: Select this option to allow the printer to use less
toner on each page.
3
Click OK.