Filter
Top Products
PROBLEM SOLVING
7.18
Troubleshooting Error Messages
While printing in the manual feed mode, the printer is waiting for the Demo
button to be pressed.
• Press the Demo button on the control panel to start printing. You must press the
button to print each page after loading paper into the manual input tray.
Waiting for the Demo button to be pressed
Data
Error
Paper
The printer front cover may be open.
• Check that the printer front cover door is closed properly.
Door open
Data
Error
Paper
If your printer is canceling a job (see page 5.5), the Error light blinks. When
cancellation is complete, the message will automatically clear. The printer
memory may not be sufficient for the print job. The page being printed may
have been too complex for the memory capacity of the printer. Press the
Cancel/Reprint button to cancel the current job.
• Try to free up memory by removing any unnecessary fonts, macros, or any data
currently in printer memory.
• Simplify the image or print at a lower resolution.
Canceling a job or memory out
Data
Paper
Error
• Reset the printer by briefly turning the printer off and back on again.
• If the error persists, contact a service representative.
LSU error
Data
Error
Paper
Toner Save