Samsung R19 Laptop User Manual


  Open as PDF
of 188
 
125
Setting a User Password
Userscanstartthesystemwithauserpassword,but
cannotentertheSystemSetup.Bydoingthis,youcan
preventotherusersfromenteringSetup.
Beforeconguringauserpassword,asupervisor
passwordmusthavebeencongured.Deactivatingthe
supervisorpasswordalsodeactivatestheuserpassword.
In the Set User Passworditem,press<Enter> and
complete the procedures from Step 3 of Setting a
SupervisorPassword.
Caution
Changing the hard disk drive password
Forsecuritypurposes,youcanonlychangeahard
disk drive password after restarting the computer
bypressingthecomputer
Powerbutton.
If you cannot change the hard disk drive password
or the HDD Password Frozen message appears
when entering the BIOS Setup and then selecting
Security > HDD 0 Password,pressthePower
buttontoturnthecomputeronagain.
Deactivating the Password
1
Press <Enter>onthepasswordtobedeactivated.
Forexample,todeactivateasupervisorpasswordin
the Set Supervisor Passworditem,press<Enter>.
2
In the Enter Current Passworditem,enterthe
currentlyconguredpasswordandpress<Enter>.
3
Leave the Enter New Passworditemeldempty,
and press <Enter>.
4
Leave the Conrm New Passwordeldempty,and
press <Enter>.
5
In the [Setup Notice]window,press<Enter>.
Thepasswordisdeactivated.
 previous next