Filter
Top Products
T
ROUBLESHOOTING
9.9
9
[Incompatible]
The remote machine does
not have the requested
feature, such as a delayed
transmission.
It also occurs if the remote
machine does not have
enough memory space to
complete the operation you
are attempting.
Reconfirm the remote machine’s
features.
[Jam 1] or
[No Cartridge]
The toner cartridge is not
installed.
Install the toner cartridge. See
page 1.10.
Line Busy
The remote person did not
answer or the line is already
engaged.
Try again after a few minutes.
[Line Error]
Your machine cannot
connect with the remote
machine or has lost contact
because of a problem with
the phone line.
Try again. If the problem
persists, wait an hour or so for
the line to clear and try again.
Or, turn the ECM on. See
page 6.35.
Load Document
You have attempted to set
up a copy or fax operation
with no document loaded.
Load a document and try again.
Low Heat Error
There is a problem in the
fuser unit.
Unplug the power cord and plug
it back in. If the problem
persists, please contact a service
representative.
Open Heat Error
[Over Heat]
Memory Full
The memory is full. Delete unnecessary documents,
retransmit after more memory
becomes available or split the
transmission into more than one
operation.
[No Answer]
The remote fax machine has
not answered after several
redial attempts.
Try again. Make sure that the
remote machine is operational.
NO. Not Assigned
The one-touch or speed dial
location you tried to use has
no number assigned to it.
Dial the number manually using
the number keypad or assign the
number. For storing a number,
see “Automatic Dialing” on
page 6.15.
Display Meaning Suggested solutions