Filter
Top Products
INSTALLATION AND SETUP
2.2 C
HAPTER
T
WO :
I
NSTALLATION AND
S
ETUP
2
1
Open the cover by lifting
the release lever on the
side of the fax machine.
3
Open the battery
compartment cover.
2
Use pencil to pull the
cover stop forward and
release the cover.
4
Connect the new battery
to the clips and insert it
into the battery slot.
Ã
The battery maintains setup
configuration and message memory if a
power fails or is accidentally
disconnected.
We recommend you use an alkaline
battery because it lasts longer than the
conventional battery.
Ã
To prevent the fax machine from
ringing while installing the battery,
disconnect the telephone line cord.
Installing the Backup Battery
5
Close the battery
compartment cover, and
close the fax machine
cover.
Ã
Reconnect the telephone line cord, if
it was disconnected in step 1.
The battery can maintain the internal
memory for about 20 hours. If the
battery is weak or missing, the LCD
displays a warning message.
Cover stop
EURO(M)-Chapter 2 3/26/98 3:22 PM Page 3