Filter
Top Products
Cleaning and Adjusting the Printer
95
5
E
EE
E
Slide the green lock lever to the
left (A
AA
A), so that the paper feed
roller can be released (B
BB
B).
F
FF
F
Wipe the rubber part of the roller
with a soft damp cloth. After that,
wipe it with a dry cloth to remove
the water.
Important
❒ Do not use chemical cleaner or
organic solvent such as thinner
or benzene.
G
GG
G
While sliding the green lock lever
to the left (A
AA
A), set the paper feed
roller to its original position (B
BB
B).
After that, return the green lock
lever to its original position (C
CC
C).
Note
❒ Confirm that the green lock le-
ver secures the roller correctly
by confirming that the roller ro-
tates smoothly.
H
HH
H
Move the printer to the place
where it was placed. Carefully
slide the paper tray into the print-
er until it stops.
Important
❒ Do not slide the paper tray in
with force. If you do, the front
and side guides might move.
I
II
I
Insert the plug of the power cord
into the wall socket securely.
Connect all the cables that were
removed in step
B
BB
B
.
J
JJ
J
Turn on the power switch.
Note
❒ Follow the same procedure to
clean the paper feed roller of the
optional Paper Feed Unit.
ZGDM120J
ZCEM130J
ZCEY150J