Making Printer Settings with the Control Panel
116
6
*1
While the printer is Online, press {
{{
{Enter #}
}}
}, and then press {
{{
{Escape}
}}
}. Finally, press
{
{{
{Menu}
}}
}. You can access the "Menu Protect", “Series Prnt.Job” and “Ppr. Size Error”
menu on the panel display.
WL. LAN Signal You can check the signal strength when using the wireless LAN.
Reference
For more information about displaying the signal strength, see
p.120 “Displaying the Signal Strength”.
WL. LAN Defaults You can reset the wireless LAN settings to the default.
Key Repeat You can scroll through the menu by holding this key down.
Note
❒ Default: On
Menu Protect
*1
This procedure lets you protect menu settings against accidental
changes. It makes it impossible to change the menu settings you
make with the normal procedure unless you perform the required
key operation. In a network environment, protecting settings re-
stricts who can change menu settings to network administrators.
• Level 1
• Level 2
• Off
Series Prnt.Job
*1
You can print series of print jobs without time intervals between
them when jobs are sent from the same computer, PDL, and inter-
face.
Note
❒ Default: On
❒ When the Job Reset key is pressed, all jobs sent to the machine
will be canceled.
Ppr.Size Error
*1
You can select whether to have an error report printed when the
paper size setting for the tray differs from the actual size of the pa-
per in the tray. You can also select whether to have an error mes-
sage displayed when feeding paper from the tray.
Note
❒ Default: Do not detect
❒ When it is "Detect", it prints with the paper size that was set
when the error message appeared.
Menu Description