Filter
Top Products
Troubleshooting
96
5
Cleaning the Registration
Roller
If the registration roller is dirty, a mis-
feed might occur. In this case, clean
the roller as follows:
R
WARNING:
R
CAUTION:
A
AA
A
Turn off the power switch.
B
BB
B
Open the front cover by pushing
the front cover release button.
C
CC
C
Pull the toner cartridge out of the
printer by holding the grips of the
cartridge.
Note
❒ Do not hold the toner cartridge
upside down or stand it verti-
cally.
❒ Do not put the toner cartridge
on an unstable or tilted surface.
D
DD
D
Wipe around the metallic regis-
tration roller by turning with a
soft damp cloth.
Important
❒ Do not use chemical cleaner or
organic solvent such as thinner
or benzene.
• Be sure to turn off the power
switch and wait for about 30
minutes before cleaning the
registration roller. Not waiting
for the printer to cool down
can result in a burn.
• The inside of the machine could
be very hot. Do not touch the
parts with a label indicating "v"
(means hot surface). Touching
"v" (means hot surface) could
result in a burn.
ZCEH120J
ZGDT110J
ZCEX461J